Renqiu Kangshu Electromechanical Equipment Co

1
Overview
The fireproof series electric rolling door machine is a product produced by our company. On the basis of absorbing the advantages of various advanced models at home and abroad, the latest electric rolling shutter door machine is developed. This product is reliable in quality, complete in functions and easy to install. It is an ideal supporting product for modern buildings. This product can be used in both left and right installation forms.
2. Working environment and working conditions
☆Ambient air temperature changes with the seasons.
☆The relative humidity is
℃.
☆Short-time working system, continuous operation shall not exceed
minutes.
Three product features
☆Beautiful and exquisite shape, compact structure, strong power
☆Using imported electrical components, safe and stable
☆Low noise, low vibration, low power consumption, light weight
☆Easy installation, long life, strong reliability
☆Easy manual operation during power outage.
/ Small board
Five installations
☆The products are manufactured according to the right installation method. Looking from the inside to the outside of the door, if the left installation is required, the four locking screws of the brake housing must be loosened, that is, the rotation of the hand The zipper housing must be re-locked, and the limit switch wires must be reversed.
☆The sprocket bracket plate can be installed horizontally according to specific needs
as shown in the figure or installed and fixed within the range. When the sprocket bracket plate is not installed horizontally, the brake housing should be rotated so that the annular hand chain naturally goes vertically downward.
At the same time, pay special attention to the fit between the housing and the motor end cover. After confirming that there is no gap, Tighten the four screws diagonally evenly to avoid cracks in the housing due to excessive tightening force and affecting the braking effect.
☆The rolling door machine should be installed horizontally, and the curtain roller should be concentric and horizontal without any jamming.
☆Adjust the chain sag before the curtain is hung on the rotating shaft.
/ Fireproof motor